AN-816STS / 816STD

 

AN-816STS : With Single Controller

AN-816STD : With Dual Redundant Controller

 

Performance

  • Utilize Powerful 1.2Ghz Dual Core RAID-On-Chip Storage Processor
  • The latest 12Gb SAS Interface supported
  • SAS 3.0 backplane, 12Gb/sec, Full duplex data transfer rate
  • Support Dual-Redundant Active-Active controller mode

Flexibility

  • 6Gb SATA disk drives are fully compatible with 12Gb SAS backplane
  • Wide range cost by GB, SATA for basic capability and SAS for high end

Scalability

  • Expands to 256 SAS devices with Alnico 24bays JBODs

 

16bays 3U Rackmount Dual 12Gb SAS to 12Gb SAS/6Gb SATA RAID Subsystem

AN-816STS/AN-816STD Series RAID System New 12Gb SAS To 12Gb SAS/6Gb SATA AN-8 series is a high performance enterprise class storage solution. This new generation storage solution is built upon on high performance 1.2Ghz RAID-on-Chip storage processor with x8 PCI Express® 3.0, up to DDR3-1866 memory, and 16 ports of 12Gb/s SAS/6Gb SATA 2.5” and 3.5” HDD. It incorporates 12Gb/s SAS host interface connections providing a dramatically performance enhancement and increasing the speed up to 20% more than AN-7 Series.

When AN-8 series expander port is used with SAS 12Gb/s expander, it can provide up to 256 devices through one or more 12Gb/s SAS JBODs.

AN-816STS/AN-816STD Dual Active-Active Redundant RAID subsystems offer the full redundancy that is expected of an enterprise solution. Dual Active-Active controller modules with cache mirroring over a PCIe 3.0 link, allows redundant data paths to ensure data availability, while redundancy power supplies, cooling fans are in place to minimize downtime and any disruption to business continuity.

Datasheet

 

Highlight

  • 1.2Ghz Dual Core RAID-On-Chip Storage Processor.
  • Advanced PCI-Express 3.0 bus architecture.
  • Up to 8GB DDR3-1866 ECC registered on one DIMM socket.
  • Hardware RAID 6 engine to support extreme performance RAID 6 function.
  • Support Global Hot Spare and local Hot Spare disk.
  • Optional Battery Backup module preserves cache contents during power failure.
  • NVRAM and Real Time Clock support, for configuration and transaction log.
  • 1 x down-stream mini-SAS HD supported, It can connect more SAS JBODs for capacity expansion.

Technical Specification

RAID Architecture

  • 1.2Ghz Dual Core RAID-On-Chip Storage Processor.
  • Up to 8GB DDR3-1866 ECC registered on one DIMM socket.
  • Advanced PCI Express 3.0 buses architecture
  • NVRAM and Real Time Clock supported

RAID Operation

  • RAID Levels: 0, 1, 1E, 3, 5, 6, 50, 60 & JBOD
  • Multiple RAID selection
  • Online RAID level/stripe size migration
  • Online Array roaming
  • Support Global Hot Spare and dedicated Hot Spare disk
  • Online capacity expansion and RAID level migration simultaneously
  • Instant availability and background initialization
  • Uniquely features “Drive Spin Down”- Saving more power consumption
  • Automatically starts bad Blocks-Scrubbing by “Scheduled Volume Checking”
  • Max 256 Physical drivers
  • Online Volume set growth
  • Max 128 LUNs ( Volume set ) per controller
  • Support S.M.A.R.T & NCQ & OOB Staggered Spin-Up capable drives
  • Automatic drive insertion / removal detection and rebuilding

Host Interface

  • Dual 12Gb miniSAS HD  ( 4 x 12Gb Links, SFF-8644) per controller

Drive Interface

  • 24 of 12Gb SAS/SATA channel – by backplane
  • Lockable disk carrier can support both 2.5″ device without additional accessories
  • 1 x miniSAS HD ( 4 x 12Gb Links) for expansion

RAID Management

  • Field-upgradeable firmware in flash ROM
  • Firmware-embedded SMTP manager monitors all system events and user can select either single or multiple user alerts to be sent via e-mails
  • Firmware-embedded Web Browser-based RAID manager via 10/100 Ethernet port

Monitors / Indicators

  • LCD control panel for setup, alarm mute and configuration
  • System status indication through LCD, LED and alarm buzzer
  • All system events can be sent to multiple user alerts via e-mails
  • Firmware-embedded SNMP agent permits the remote to monitor all events through LAN with no SNMP agent required

Environmental / Physical

  • Cooling
    • Two redundant, hot-swappable cooling modules with self-regulating speeds and wide range airflow design
    • Controlled by RAID controller automatically maintaining optimal ambient temperature
  • Electrical
    • Redundant by dual 500W power supplies with PFC and energy-efficient 80Plus e, load-sharing type, hot-swappable and cable-less design
    • AC Voltage 110-230 VAC /AC Frequency 50-60Hz
  • temperature
    • Operating temperature: 5 to 35 degree C
    • Non-operating temperature: -40 to 60 degree C
  • Relative Humidity
    • 20% to 80% non-condensing
  • Size and Weight
    • Dimensions: 449mm(W) x 468mm(D) x 2U
    • Weight (w/o HDDs): 20KGS