AN-812iAS/812iAD

 

AN-812iAS : With Single Controller

AN-812iAD : With Dual redundant Controller

 

Performance

  • Utilize Powerful 1.2Ghz Dual Core RAID-On-Chip Storage Processor
  • The latest 12Gb SAS Interface supported
  • SAS 3.0 backplane, 12Gb/sec, Full duplex data transfer rate
  • Support Dual-Redundant Active-Active controller mode

Flexibility

  • 6Gb SATA disk drives are fully compatible with 12Gb SAS backplane
  • Wide range cost by GB, SATA for basic capability and SAS for high end

Scalability

  • Expands to 256 SAS devices with Alnico 24bays JBODs

 

12bays 2U Rackmount Dual 10Gb iSCSI to 12Gb SAS/6Gb SATA RAID Subsystem

The New AN-812iA Series is the latest 10Gb iSCSI To 12Gb SAS/6Gb SATA RAID subsystem PetaStor owns.

The AN-812iAS is built on high performance RAID-on-Chip( ROC ) 1.2Ghz Dual Core storage processor with PCI-Express 3.0 bus architecture, and up to 8Gb DDR3-1866 memory.

The AN-812iAS RAID subsystem deliver excellent performance based on Dual 10Gb Ethernet SFP+ ports for host connectivity on each controller supporting 12bay of 12Gb/s SAS and 6Gb/s SATA 2.5” and 3.5” hard drive. With JBOD enclosures (SAS Expander) supporting up to 256 SAS/SATA /SSD devices connected.

Consolidate and manage data over your network with simple, affordable and reliable enterprise-level 10Gb iSCSI technology. The AN-812 iAS provides today’s enterprises and businesses with affordable iSCSI technology, consolidated storage, high performance and quick interoperability, generating a totally new version and experience in using iSCSI RAID subsystem.

Datasheet

 

Highlight

  • 1.2Ghz Dual Core RAID-On-Chip Storage Processor.
  • Advanced PCI-Express 3.0 bus architecture.
  • Up to 8GB DDR3-1866 ECC registered on one DIMM socket.
  • iSCSI Hardware iSCSI off-load engine.
  • iSCSI jumbo Frames.
  • iSCSI Header/Data digest support.
  • iSCSI CHAP authentication.
  • Support Global Hot Spare and local Hot Spare disk.
  • Optional Battery Backup module preserves cache contents during power failure.
  • NVRAM and Real Time Clock support, for configuration and transaction log.
  • 1 x down-stream miniSAS HD connectors supported, It can connect more SAS JBODs for capacity expansion.

Technical Specification

RAID Architecture

  • 1.2Ghz Dual Core RAID-On-Chip Storage Processor.
  • Up to 8GB DDR3-1866 ECC registered on one DIMM socket.
  • Advanced PCI Express 3.0 buses architecture
  • NVRAM and Real Time Clock supported

RAID Operation

  • RAID Levels: 0, 1, 1E, 3, 5, 6, 50, 60 & JBOD
  • Multiple RAID selection
  • Online RAID level/stripe size migration
  • Online Array roaming
  • Support Global Hot Spare and dedicated Hot Spare disk
  • Online capacity expansion and RAID level migration simultaneously
  • Instant availability and background initialization
  • Uniquely features “Drive Spin Down”- Saving more power consumption
  • Automatically starts bad Blocks-Scrubbing by “Scheduled Volume Checking”
  • Max 256 Physical drivers
  • Online Volume set growth
  • Max 128 LUNs ( Volume set ) per controller
  • Support S.M.A.R.T & NCQ & OOB Staggered Spin-Up capable drives
  • Automatic drive insertion / removal detection and rebuilding

Host Interface

  • Dual 10Gb Ethernet by SFP+ per controller

Drive Interface

  • 12 of 12Gb SAS/6GbSATA channel – by backplane
  • Lockable disk carrier can support both 2.5″ device without additional accessories
  • 1 x miniSAS HD connectors ( 4 x 12Gb Links) for expansion

RAID Management

  • Field-upgradeable firmware in flash ROM
  • Firmware-embedded SMTP manager monitors all system events and user can select either single or multiple user alerts to be sent via e-mails
  • Firmware-embedded Web Browser-based RAID manager via 10/100 Ethernet port

Monitors / Indicators

  • LCD control panel for setup, alarm mute and configuration
  • System status indication through LCD, LED and alarm buzzer
  • All system events can be sent to multiple user alerts via e-mails
  • Firmware-embedded SNMP agent permits the remote to monitor all events through LAN with no SNMP agent required

Environmental / Physical

  • Cooling
    • Two redundant, hot-swappable cooling modules with self-regulating speeds and wide range airflow design
    • Controlled by RAID controller automatically maintaining optimal ambient temperature
  • Electrical
    • Redundant by dual 500W power supplies with PFC and energy-efficient 80Plus e, load-sharing type, hot-swappable and cable-less design
    • AC Voltage 110-230 VAC /AC Frequency 50-60Hz
  • temperature
    • Operating temperature: 5 to 35 degree C
    • Non-operating temperature: -40 to 60 degree C
  • Relative Humidity
    • 20% to 80% non-condensing
  • Size and Weight
    • Dimensions: 446.5mm(W) x 517mm(D) x 2U
    • Weight (w/o HDDs): 17KGS