AN-812FUS / 812FUD

 

AN-812FUS : With Single Controller

AN-812FUD : With Dual Redundant Controller

 

 

Performance

  • Utilize Powerful 1.2Ghz Dual Core RAID-On-Chip Storage Processor
  • Latest 32Gb Fibre channels supported
  • SAS 3.0 backplane, 12Gb/sec, Full duplex data transfer rate
  • Support Dual-Redundant Active-Active controller mode

Flexibility

  • 6Gb SATA disk drives are fully compatible with 12Gb SAS backplane
  • Wide range cost by GB, SATA for basic capability and SAS for high end

Scalability

  • Expands to 256 SAS devices with Alnico 24bays JBODs

 

12bays 2U Rackmount Quad 32Gb Fibre to 12Gb SAS/6Gb SATA RAID Subsystem

The AN-812FUS/AN-812FUD Series RAID System New 32Gb Fibre To 12Gb SAS/6Gb SATA AN-8 series raise the standard to higher performance levels with several enhancements including a new high-performance 1.2Ghz Dual Core RAID-on-Chip processor, a DDR3-1866 memory architecture supports up to 8GB, Quad 32Gb Fibre as host interface. By incorporating many new advanced features, New AN-8 Series provide all of the necessary capabilities for applications to achieve the maximum possible availability, reliability, scalability and performance.

New AN-8 Series RAID Sub-Systems provide the same customers familiar user interface and RAID management tool to simplify the creation, monitoring and maintenance of storage configurations. In addition, to meet nowadays strict performance requirements of video editing, post production and streaming applications, New AN-8 Series provide the Advanced Configuration features so that user can fine-tune the performance to achieve a sustain performance for specific applications.

 

Highlight

  • 1.2Ghz Dual Core RAID-On-Chip Storage Processor.
  • Industry-leading host Connectivity: 32Gb/s Fibre
  • 12Gb SAS Backplane, supports 12Gb/s SAS and 6Gb/s SATA 2.5” and 3.5” hard drive.
  • Advanced PCI-Express 3.0 bus architecture.
  • Up to 8GB DDR3-1866 ECC registered on one DIMM socket.
  • Hardware RAID 6 engine to support extreme performance RAID 6 function.
  • Support Global Hot Spare and local Hot Spare disk.
  • Optional Battery Backup module preserves cache contents during power failure.
  • NVRAM and Real Time Clock support, for configuration and transaction log.
  • 1 x down-stream miniSAS HD connectors supported, It can connect more SAS JBODs for capacity expansion.

Technical Specification

RAID Architecture

  • 1.2Ghz Dual Core RAID-On-Chip Storage Processor.
  • Up to 8GB DDR3-1866 ECC registered on one DIMM socket.
  • Advanced PCI Express 3.0 buses architecture
  • NVRAM and Real Time Clock supported

RAID Operation

  • RAID Levels: 0, 1, 1E, 3, 5, 6, 50, 60 & JBOD
  • Multiple RAID selection
  • Online RAID level/stripe size migration
  • Online Array roaming
  • Support Global Hot Spare and dedicated Hot Spare disk
  • Online capacity expansion and RAID level migration simultaneously
  • Instant availability and background initialization
  • Uniquely features “Drive Spin Down”- Saving more power consumption
  • Automatically starts bad Blocks-Scrubbing by “Scheduled Volume Checking”
  • Max 256 Physical drivers
  • Online Volume set growth
  • Max 128 LUNs ( Volume set ) per controller
  • Support S.M.A.R.T & NCQ & OOB Staggered Spin-Up capable drives
  • Automatic drive insertion / removal detection and rebuilding

Host Interface

  • Quad 32Gb Fibre channels per controller

Drive Interface

  • 12 of 12Gb SAS/6GbSATA channel – by backplane
  • Lockable disk carrier can support both 2.5″ device without additional accessories
  • 1 x miniSAS HD connectors ( 4 x 12Gb Links) for expansion

RAID Management

  • Field-upgradeable firmware in flash ROM
  • Firmware-embedded SMTP manager monitors all system events and user can select either single or multiple user alerts to be sent via e-mails
  • Firmware-embedded Web Browser-based RAID manager via 10/100 Ethernet port

Monitors / Indicators

  • LCD control panel for setup, alarm mute and configuration
  • System status indication through LCD, LED and alarm buzzer
  • All system events can be sent to multiple user alerts via e-mails
  • Firmware-embedded SNMP agent permits the remote to monitor all events through LAN with no SNMP agent required

Environmental / Physical

  • Cooling
    • Two redundant, hot-swappable cooling modules with self-regulating speeds and wide range airflow design
    • Controlled by RAID controller automatically maintaining optimal ambient temperature
  • Electrical
    • Redundant by dual 500W power supplies with PFC and energy-efficient 80Plus e, load-sharing type, hot-swappable and cable-less design
    • AC Voltage 110-230 VAC /AC Frequency 50-60Hz
  • temperature
    • Operating temperature: 5 to 35 degree C
    • Non-operating temperature: -40 to 60 degree C
  • Relative Humidity
    • 20% to 80% non-condensing
  • Size and Weight
    • Dimensions: 446.5mm(W) x 517mm(D) x 2U
    • Weight (w/o HDDs): 17kg